Pete Sawyer signature grips are a mushroom style grip made with a soft kraton rubber compound with easy to remove flanges. Plastic bar ends included. 150mm long
Weight:
they're grips
Colors:Black, red, blue, gum
MERRITT CROSS–CHECK GRIPS
Charlie Crumlish signature grips, soft kraton rubber with a flangeless design that’s long and thin. Plastic bar ends included. 160mm long
Weight:
they're grips
Colors:Black, red, blue, gum
MERRITT INSERT BAR ENDS
Nylon press-fit bar ends with a molded in steel washer that prevents handlebars from cutting through the bar end.
Weight:
0.8oz (pair)
Colors:Black, red, blue, gum
KINK DELTA II GRIPS
Color: Black, Gray
Length: 165mm
Diameter: 28mm
Made From New Softer But Longer Lasting Compound
Includes Color Matched Drive Barends
Sold In Pairs
KINK OMEGA GRIPS
Color: Black, Gray, Crimson Red, Orange/Black, Blue/Black, Cyan Blue, Blue, Bronze, Yellow/Blue
Length: 140mm
Diameter: 27.5mm
Made From Soft Kraton Rubber
Includes Color Matched Drive Barends
Sold In Pairs
UNITED G-SLAT GRIPS
We all know Geoff likes to keep things simple, so his new signature G-Slat grips are a reflection of that. The classic ribbed grip is tried and tested, we used a soft compound to make sure these have that tacky and squashy feel, with two small 45° angle ribbed sections at each end to improve wear.
SPECS
Geoff Slattery signature grip
Soft compound
152mm long
29.5mm diameter
United nylon bar ends included
Black. Tie Dye & Camo
UNITED JIMMY GRIPS
Our new Jimmy Rushmore signature United Alchemist grips are made from soft krayton rubber with a pattern that is as much function as fashion. With small raised dimples to provide extra grip, cut lines that enable it to be run flangeless and a slim overall diameter which is just what Jimmy ordered. The bright colours set it off and the tie dye version will please the inner hippy in you, peace.
SPECS
Jimmy Rushmore signature grip
Soft compound
153mm long
27mm diameter
United nylon bar ends included
Black, Grey, Fluro Green, Fluro Orange, Tie Dye & Camo
UNITED NATHAN WILLIAMS GRIPS
Length: 165mm
Diameter: 28mm
Made From New Softer But Longer Lasting Compound
Includes Color Matched Drive Barends
Sold In Pairs
KINK OMEGA GRIPS
Color: Black, Gray, Crimson Red, Orange/Black, Blue/Black, Cyan Blue, Blue, Bronze, Yellow/Blue
Length: 140mm
Diameter: 27.5mm
Made From Soft Kraton Rubber
Includes Color Matched Drive Barends
Sold In Pairs
UNITED G-SLAT GRIPS
We all know Geoff likes to keep things simple, so his new signature G-Slat grips are a reflection of that. The classic ribbed grip is tried and tested, we used a soft compound to make sure these have that tacky and squashy feel, with two small 45° angle ribbed sections at each end to improve wear.
SPECS
Geoff Slattery signature grip
Soft compound
152mm long
29.5mm diameter
United nylon bar ends included
Black. Tie Dye & Camo
UNITED JIMMY GRIPS
Our new Jimmy Rushmore signature United Alchemist grips are made from soft krayton rubber with a pattern that is as much function as fashion. With small raised dimples to provide extra grip, cut lines that enable it to be run flangeless and a slim overall diameter which is just what Jimmy ordered. The bright colours set it off and the tie dye version will please the inner hippy in you, peace.
SPECS
Jimmy Rushmore signature grip
Soft compound
153mm long
27mm diameter
United nylon bar ends included
Black, Grey, Fluro Green, Fluro Orange, Tie Dye & Camo
UNITED NATHAN WILLIAMS GRIPS
Nathan Williams Signature Grips. Nathan had a few requests on his signature grip “it has to feel good” being the most important, so it needed to be soft yet durable. He also changes his mind like the wind, flanges one day, flangeless the next, and length is important (to catch barspins!)
We took a simple ribbed design, and tackled problems by getting tech and using a slightly wider rib, with staggered heights and recessed cut outs that provide durability, but combined with the soft density compound make the grip soft and “squashy” to the feel. Smaller grooves that lock into your fingers help prevent the grip from slipping out of your hands, and being able to cut down the grips in three different ways to your preferred length mean this is a grip to suit almost everyone.
DARTMOOR ROOTS GRIPS
The new Roots grips are our answer to the needs of the gravity riders. Michał Sliwa (the forerunner of the Polish Downhill scene and the multi medalist of this discipline) got us hooked on this idea of developing the grips that will be thicker and softer than other grips on the market. The hard part of this project was to design a product that will not catch mud easily and still be sticky in the extreme conditions. After lots of testing and feedback the Roots grips were born. They come into their own in wet Downhill and Freeride tracks but our testers found them good enough even for Enduro or Dirt Jumping.
The surface design can be described as the mountains slowly turning into the tree roots. Those soft elements not only looks good but are ergonomically linked with the structure of the hand. The center of the hand got a solid grab on the mountains looking pattern while fingers slip between the roots pattern to catch even firmer grip! These lock-on beauties comes with a special aluminium bar end design where the side cap is replaceable. You will get them with the aluminium side cap assembled but don’t worry weight weenies, we will include a set of spare plastic caps for you too!
Length: 130mm.
Diameter: 32mm.
Weight: 123g (w/aluminium side caps), 117g (w/plastic side caps).
DARTMOOR ICON GRIPS
DARTMOOR ICON GRIPS
Lightweight and comfortable MTB grips with lock-on alu clamps and Ride Your Way alu bar ends. 145mm length gives you planty of room for barspins and other tricks. Custom design with Dartmoor logo in the grip pattern. Special compound material - comfortable but not too soft with significantly increased durability. Alu bar ends for better handlebar protection.
Length: 150mm.
Weight: 138g / 4.87oz. (clamps/bar ends included)
DARTMOOR RACE GRIPS
Classic MTB grips with lock-on alu clamps and mushroom pattern. Made of Kraton.
Length: 145mm.
Weight: 122g (clamps/plugs included).
DARTMOOR BLOCK GRIPS
Soft grips made of very comfortable and durable compound. Low profile, multiple direction Tetris style pattern for better control. Flangeless design. Nylon pad controller style bar ends included. DartBMX and ‘Each block is different but game is the same’ logos.
Length: 155mm.
Diameter: 29mm.
Weight: 96g (bar ends included).
DARTMOOR SHAMANN GRIPS
Length: 150mm.
Weight: 138g / 4.87oz. (clamps/bar ends included)
DARTMOOR RACE GRIPS
Classic MTB grips with lock-on alu clamps and mushroom pattern. Made of Kraton.
Length: 145mm.
Weight: 122g (clamps/plugs included).
DARTMOOR BLOCK GRIPS
Soft grips made of very comfortable and durable compound. Low profile, multiple direction Tetris style pattern for better control. Flangeless design. Nylon pad controller style bar ends included. DartBMX and ‘Each block is different but game is the same’ logos.
Length: 155mm.
Diameter: 29mm.
Weight: 96g (bar ends included).
DARTMOOR SHAMANN GRIPS
High flanges grips made of special rubber compound with increased durability and extra softness for very comfortable using. Plastic bar plugs included (screw type).
Length: 150mm.
Weight: 154g / 5.43oz. (plugs included).
DARTMOOR EVOLUTION GRIPS
Length: 150mm.
Weight: 154g / 5.43oz. (plugs included).
DARTMOOR EVOLUTION GRIPS
Classic BMX grips with high flange and mushroom pattern. Made of Kraton.
Length: 147mm.
Weight: 151g / 5.33oz. (plugs included).
DARTMOOR BAR END
Push style bar ends with a unique design fitting all the inner diameter sizes of the different handlebars. Made of two sections, each in different size, with a cutting line between them. If uncut these bar ends fit perfectly cr-mo MTB and BMX bars and after cutting they can be used for aluminium bars with thicker walls.
Weight: 16g.
Push style bar ends with a unique design fitting all the inner diameter sizes of the different handlebars. Made of two sections, each in different size, with a cutting line between them. If uncut these bar ends fit perfectly cr-mo MTB and BMX bars and after cutting they can be used for aluminium bars with thicker walls.
Weight: 16g.
